Axis 209MFD User Manual

Also see for AXIS 209MFD: Specifications Product guide Installation guide Datasheet

Axis 209MFD User Manual Manual pdf 33 page image

33AXIS 209MFD/MFD-R/MFD-R M12RTP/MPEG-4These settings are the port range, IP address, port number (video and audio), and Time-To-Live value to usefor the video stream(s) in multicast MPEG-4 format. Only certain IP addresses and port numbers should beused for multicast streams. For more information, please see the online help.BonjourThe AXIS 209MFD includes support for Bonjour. When enabled, the camera is automatically detected byoperating systems and clients that support this.LED SettingsThe Status indicator LED on the camera can be set to flash at a configurable interval (or to not light up atall) whenever the unit is accessed. For a listing of all LED behavior, see page 7, or the online help. Note thatthe LED does not flash when the stream is retrieved using MPEG-4 multicast.Maintenance• Restart - The camera is restarted without changing any of the settings.• Restore - The unit is restarted and most current settings are reset to factory default values. The set-tings that will not be reset are as follows:• the boot protocol (DHCP or static)• the static IP address• the default router• the subnet mask• Default - The default button should be used with caution. Pressing this will return all of the cam-era's settings to the factory default values (including the IP address)Upgrade Server - See Upgrading the Firmware, on page 36.Backup - To take a backup of all of the parameters, and any user-defined scripts, click this button. Ifnecessary, it will then be possible to return to the previous settings, if settings are changed and there isunexpected behavior.Restore - click the Browse button to locate the saved backup file (see above) and then click the Restorebutton. The settings will be restored to the previous configuration.Note: Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for the configu-ration of multiple units or for firmware upgrades.SupportSupport OverviewThe support overview page provides valuable information on troubleshooting and contact information,should you require technical assistance.System OverviewSystem Overview - page provides a quick look over the current network, security, event and camerasettings.Logs & ReportsWhen contacting Axis support, please be sure to provide a valid Server Report with your query. The AccessLog is automatically included in the server report.InformationThis page gives you access to the following log files and reports that may prove useful whentroubleshooting a problem or when contacting the Axis support web.