Axis 209MFD User Manual

Also see for AXIS 209MFD: Specifications Product guide Installation guide Datasheet

Axis 209MFD User Manual Manual pdf 26 page image

26AXIS 209MFD/MFD-R/MFD-R M12Camera TamperingThe camera tampering application generates an alarm whenever the camera is repositioned, or when thelens is covered, sprayed or severely put out of focus.The Minimum duration parameter defines the time between the tampering and the alarm. This helps preventfalse alarms.Check the Alarm for dark images box if there should be an alarm when the camera lens is sprayed and theimage is dark.Motion DetectionMotion detection is used to generate an alarm whenever movement occurs (or stops) in the video image. Atotal of 10 Include and/or Exclude windows can be configured.• Included windows target specific areas within the whole video image• Excluded windows define areas within an Include window that should be ignored (areas outsideInclude windows are automatically ignored)Once configured, the motion detection windows appear in the list of available triggers, for triggering events.See How to set up a triggered event above.Note: Using the motion detection feature may decrease the camera’s overall performance.Configuring Motion Detection1. Click Motion Detection in the Event Config menu.2. Click New against Windows Name.3. Select the Include or Exclude option to define an Include or Exclude window, and enter adescriptive name in the field below.4. Click Save.5. Adjust the size (drag the bottom right-hand corner) and position (click on the text at the top anddrag to the desired position).6. Adjust the Object Size, History and Sensitivity profile sliders (see table below for details). Anydetected motion within an active window is then indicated by red peaks in the Activity window(the active window has a red frame).7. Click Save..To exclude parts of the Include window, click the Configure Excluded Windows buttonand position the Exclude window as required, within the Include window.