Axis 2110 User Manual
Also see for NETZWERK-KAMERA 2110: Product guideInstallation guideInstallation guideInstallation guideTechnical specifications
                                                                    | |
Contents
| 
AXIS 2110 User’s Manual Technical Specifications 65Appendix G - Technical SpecificationsSystem Requirements - TCP/IP on Windows 95, 98, NT and 2000, as well as Linux, UNIX,Mac and several others. Microsoft Internet Explorer 4.x, or higher (used with Axis’ ActiveXcomponent AXIS Camera Control), or Netscape 4.x or higher.Network Connection - RJ45 twisted pair cable, or remote connection using any standardserial modem.Networking - 10baseT Ethernet or 100baseTX Fast Ethernet, TCP/IP, HTTP, FTP, SMTP, NTP,ARP and BOOTP.I/O Connector - 1 optical-isolated alarm input. 1 digital output (max 24V, 100mA) withprogrammable digital input/output for remote image storage via FTP or SMTP, pre/postalarm image storage.Image Updating - Up to 15 frames/second over 10Mbps or 100Mbps networks.Pre/Post Alarm Buffer - Up to 500kB memory available for pre/post alarm image storage.Modem Connector - Single 9-pin D-SUB RS-232 connector, max 115 kbps, half duplexOperating Conditions: - Temp: 40o to 105 o F (+5o to +40 o C), Humidity: 20-80% RHG.Approvals - EMC: FCC Class A, EN 55022/1994, EN55024/1998Safety: EN 60950, UL, CSA.Metrics: - Height: 1.6” (4.0 cm), Width: 4.1” (10.5 cm), Length: 6.9” (17.5 cm), Weight: 0.56lb. (0.26 kg) excluding power supply.Hardware - ARTPEC-1 compression chip; ETRAX-100, including, 32 bit RISC, 100 MIPSCPU, 8 MB RAM, 2 MB FLASH PROM.Power - External power supply 12V AC, 9.6 VA (PS-D, included), 9-15V AC, min. 10VA, or9-15V DC, min. 7W. |
Related manuals for Axis NETZWERK-KAMERA 2110
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine