10 AXIS 214 PTZ - Accessing the cameraNotes:• The layout of the Live View page in the AXIS 214 PTZ may have been customized to meet the specific requirements ofthe application. Consequently, many of the examples and functions in this section may differ from those displayed inyour Live View page.• If the AXIS 214 PTZ is to be placed upright on a desktop, the image must be rotated. Go to Setup > Video & Image andset Rotate image to 180 degrees.• To view streaming video with AXIS Media Control (AMC) in Microsoft Internet Explorer, you must set your browser toallow the to be installed on your computer. The first time an MPEG-4 video stream is accessed, AMC also installs anMPEG-4 decoder for viewing the video stream. As a license is required for each instance of the decoder, the productadministrator may have disabled the installation. If your workstation restricts the use of additional softwarecomponents, the camera can be configured to use a Java applet for updating JPEG images. See the online help formore information.Accessing the camera from the InternetOnce installed, the camera is accessible on your local network (LAN). To access the camerafrom the Internet you must configure your router/firewall to allow incoming data traffic.For security reasons this is usually done on a specific port. Please refer to thedocumentation for your router/firewall for further instructions.For more information, please visit the AXIS Internet Dynamic DNS Service atwww.axiscam.net or, for Technical notes on this and other topics, visit the Axis SupportWeb at www.axis.com/techsup