7AXIS 214 PTZ - Product DescriptionRear panelThe rear panel contains all of the connections available on the AXIS 214 PTZ. The viewshown here is from a ceiling mounted camera.Line/Mic inLine outNetworkPower connectorI/O terminal connectorStatus indicatorNetwork indicatorPower indicatorControl buttonconnectorControl button - This is used to restore the factory default settings, as described in Resettingto the factory default settings, on page 48.Indicators - After completion of the startup and self-test routines, the multi-coloredNetwork, Status and Power indicators flash as follows:Amber Flashes for activity on a 10 Mbit/s networkGreen Flashes for activity on a 100 Mbit/s networkNone No connectionGreen Normal operationAmber Flashes during startup, reset to factory default and firmware upgradeGreen Normal operationAmber Flashes green/amber during upgradeI/O Terminal connector - The I/O terminal connector provides the physical interface to onetransistor output, one digital input and an auxiliary connection point for DC power. Formore information, see I/O inputs and outputs, on page 49.NetworkStatusPower