Axis 214 PTZ User Manual

Also see for AXIS 214 PTZ: Specifications Product guide Operating instructions Installation guide Specifications

Contents

11AXIS 214 PTZ - Accessing the cameraThe Live View pageThe following provides an overview of the controls found on the Live View page. If theAXIS 214 PTZ has been customized (from Setup > Live View Config > Layout), thecontrols will be displayed accordingly:The Video Format drop-down list allows the video format on theLive View page to be temporarily changed.The 2 types of Output buttoneach control the outputdirectly from the Live Viewpage. These are configuredunder Setup > Live ViewConfig > Layout.Pulse - click this button to activate theoutput for a defined period of time, e.g.to switch on a light for 20 seconds.Active/Inactive - click these buttons tomanually start and stop a connecteddevice, e.g. switch a light on/off.These buttons start/stop the Sequence Mode which automaticallydisplays the view from preset positions at set intervals. Sequence mode isconfigured in Setup > PTZ Configuration > Sequence Mode.The Manual trigger buttons trigger an action directly from the LiveView page. These buttons are configured under Setup > Live ViewConfig > Layout. Click these buttons to manually start and stop events.Use the Snapshot button to capture a snapshot of the image currentlybeing displayed in the window. Right-click on the image to save it inJPEG format on your computer.The source list is used to select the preset positions alreadyconfigured in the camera. These are created in Setup > PTZConfiguration > Preset Positions.