Axis 214 PTZ User Manual

Also see for AXIS 214 PTZ: Specifications Product guide Operating instructions Installation guide Specifications

Contents

9AXIS 214 PTZ - Accessing the cameraAccessing the cameraThe AXIS 214 PTZ can be used with most standard operating systems, and supportsMicrosoft Internet Explorer 5.x or later, Netscape 7.x or later and Mozilla 1.4 or later.Accessing the camera from a browser1. Start a browser (Internet Explorer, Mozilla, Netscape Navigator).2. Enter the IP address or host name of theAXIS 214 PTZ in the Location/ Addressfield of your browser.3. Enter the user name and password set bythe administrator. If required, click Yes to install the AXIS Media Control (AMC).4. The Live View page isdisplayed in your browser.Note: - if this is the firsttime the camera isaccessed, the ‘ConfigureRoot Password’ dialog willbe displayed on the screen.“Root” is the defaultadministrator user name.Setting the password for root1. Enter a password and thenre-enter it to confirm thespelling. Click OK.2. The ‘Enter NetworkPassword’ dialog willappear. Enter the Username: root.3. Enter the password as setabove, and click OK. If thepassword is lost, the camera must be reset to the factory default settings. See page48.