Axis 223M User Manual

Also see for AXIS 223M: Specifications Product guide Installation guide Hoja de datos User manual

AXIS 223M - Replacing the lens41Replacing the lensIf the lens on the AXIS 223M needs to be replaced or if the camera was supplied without a lens, a new lens canbe fitted quickly and easily. As the AXIS 223M is designed with a C-mount, the lens supplied with your productcan be replaced with any standard C or CS lens.Note: Although the lens supplied with your product can be directly replaced with any C-type lens, a CS-type lens must be installed with anadapter for it to work with your AXIS 223M. An adapter effectively moves the lens 5mm closer to the camera.Removing and attaching the lens1. Disconnect the power supply to the AXIS 223M.2. Disconnect the DC-Iris cable.3. Unscrew the lens by turning it anti-clockwise.4. CS-lens only: Attach the new lens to the suppliedCS-adapter.5. Screw on the new lens until it is tight against the metal ringat the back.6. Attach the DC-Iris cable to the camera and reconnect thepower supply.7. To focus the new lens, see Focusing, on page 8.Note: In the unlikely case that the camera images are still blurred after focusing the lens, loosen the screw on the underside of the camerathat holds the metal ring in place. Turn the metal ring in small increments until a sharp image is obtained. Tighten the screw on theunderside of the camera.Zoom puller(Tele/wide)Focus pullerDC-Iris control cableMetal ring