Axis 223M User Manual

Also see for AXIS 223M: Specifications Product guide Installation guide Hoja de datos User manual

AXIS 223M - Accessing the Camera9The Live View PageDepending on whether or not the Live View page has been customized, the buttons described below may or maynot be visible.The Video Format drop-down list allows the video format on the Live View page to betemporarily changed.These buttons start and stop the Sequence Mode. This mode is created in Setup > Live ViewConfig > Sequence mode, and automatically displays the view from 2 or more video sources at setintervals.From the Source list, select the desired external video source. Note that Sequence Modemust be stopped before selecting a source from this list.The Trigger buttons can trigger an event directly from the Live View page. These are configuredunder Setup > Live View Config > Layout.The Snapshot button saves a snapshot of the image currently being displayed. Right-click on thevideo image to save it in JPEG format on your computer. This button is intended for use when theAMC viewer toolbar is not available.The AMC (AXIS Media Control) viewer toolbar is available in Microsoft Internet Explorer for Windows only.It displays the following buttons:Play/Stop button - starts and stops the live video stream.Snapshot button - saves a snapshot of the video image currently being displayed. The Snapshot functionand the target directory for saving snapshots can be configured from the AMC Control Applet in theWindows Control Panel (Internet Explorer only).View Full Screen button - makes the image fill the entire screen area. No other windows will be visible.Press Esc (Escape) on the keyboard to exit full screen.Click the Record button to start an MPEG-4 recording (only available when viewing MPEG-4).The Output buttons control theoutput directly from the LiveView page. These buttons areconfigured under Setup > LiveView Config > Layout.Pulse - click this button to activate the output for a definedperiod of time, e.g. to switch on a light for 20 seconds.Active/Inactive - click these buttons to manually start and stop aconnected device, e.g. switch a light on/off.