10 INSTRUCTION MANUAL_____________________________________________________________________________________________________________________ Setting threshold 1 value (option):Computer Scale: S L D1...DN CR LF (53h 4Ch D1...DN 0Dh 0Ah)D1...DN – threshold value, maximum 8 characters („-” – negative value, digits, dot – decimalseparator), number of digits after dot should be the same as on scale display,Scale Computer: without response,Example: in order to set low threshold 1000g in scale B1.5 (d=0.5g) the following order should be sent:S L 1 0 0 0 . 0 CR LF (53h 4Ch 31h 30h 30h 30h 2Eh 30h 0Dh 0Ah), in order to set low threshold 100kg in scale B150 (d=50g) the following order should be sent:S L 1 0 0 . 0 0 CR LF (53h 4Ch 31h 30h 30h 2Eh 30h 30h 0Dh 0Ah),), Setting threshold 2 value (option):Computer Scale: S H D1...DN CR LF (53h 48h D1...DN 0Dh 0Ah),D1...DN – threshold value, maximum 8 charactersScale Computer: without response. Setting threshold 3 value (option):KomputerWaga: S M D1...DN CR LF (53h 4Dh D1...DN 0Dh 0Ah),gdzie: D1...DN – threshold value, maximum 8 charactersWagaKomputer: without response.Connecting cable WK-1 (scale – computer / 9-pin interface):Connection cable WD-1 (connects scale with AXIS printer):Setting of internal switches of AXIS printer:SW-1 SW-2 SW-3 SW-4 SW-5 SW-6 SW-7 SW-8on off on off off on off offSCALE KAFKA PRINTERSCALE COMPUTER
