INSTRUCTION MANUAL 61_____________________________________________________________________________________________________________________18.16 Paperweight calculation (PAP)This function enables to calculate paperweightof 1m2 of paper basing on samples of knownarea. For quick access, the function isaccessible directly by pressing MENU key.The balance must be tared just before themeasurement.Place the specific sample quantity of the samearea (possible values: 1, 2, 5, 10, 20, 50, 100).Press MENU key to access Function Menu. Toenter the function pressT key when PAPEris displayed.Following options show on the display:- PAP oFF – turn off the function,- PAP on – turn on,- PAP n – inscribing number of paper pieces onpan,- PAP ArE – inscribing surface of single piece (inm2)PressT key when PAP n and PAP ArE isdisplayed.Enter number of samples using:0 -increasing digit,T - next digit,MENU – end of inscribing.PressT key when PAP ArE is displayed.Enter area of a single sample (as above).The result of paperweight measurement isfinished with „o” mark pointing g/m2 unit.In order to finish work with function press MENUand then usingT key choose PAPEr andPAP oFFNote:“PAP Err” communicate marks that wrongvalues were inscribed in PAP n or PAP ArE.0g5
