Axis 5400+ User Manual

Also see for 5400+: Specification User guide Installation guide User guide User manual

Contents

Axis 5400+ User Manual Manual pdf 30 page image

Adding Printers in Windows30 AXIS 5400+ / AXIS 5600+ User’s ManualAdding Printers in Windows 2000 / XP / 2003 using the Microsoft LPR MonitorThis section describes how to set up a Windows 2000/XP/2003 server forLPR printing over the TCP/IP protocol, using the built-in Microsoft LPRMonitor i.e. Print Services for UNIX.Note:Basic Setup If you have not already done so, you should perform the TCP/IP basicsetup procedures prior to installing a printer for LPR printing.Preparing forLPR PrintingFollow the following steps to prepare for LPR printing:1. Open the Control Panel.2. Click Add/Remove Programs.3. Click Add/Remove Windows Components.4. Check Other Network File and Print Services and click Details.5. Check Print Services for Unix and click OK.6. Click Next and Finish.7. Close Add/Remove Programs and the Control Panel.Installing an LPRprinterFollow the instructions below to use the standard Windows method forinstalling an LPR printer in Windows 2000/XP/2003:Windows XP/2003: 1. Go to Start | Printers and Faxes and click the Add a Printer icon to startthe Add Printer Wizard. Click Next.Windows 2000: 1. Go to Start | Settings | Printers and click the Add Printer icon to startthe Add Printer Wizard. Click Next.2. Select the appropriate radio button: Local Printer. Click Next.3. Click the Create a new port radio button and select LPR Port from the list.Click Next.4. Enter IP address (or host name) of the print server in the field Name andaddress of server providing lpr (Example: 192.168.3.191) and enter the portyou want to use in the field Name of printer or print queue on that server(Example: LPT1, LPT2, COM1). Click OK.5. End the Wizard in the usual manner: select Manufacturer and Printer,keep/replace driver, name the printer, make it default or not, share it or notand finally decide whether you want to print a test page.See “Alternative Method for LPR Printing” on page 31 for instructions onhow to set up printing over LPR without installing Print Services for Unix.