Axis 5400+ User Manual

Also see for 5400+: Specification User guide Installation guide User guide User manual

Contents

Axis 5400+ User Manual Manual pdf 35 page image

Adding Printers in WindowsAXIS 5400+ / AXIS 5600+ User’s Manual 35Adding NetBIOS/NetBEUI Printers in Windows 2000 using AXIS Print MonitorSee to it that the NetBEUI protocol is installed on your client. Follow theprocedure below to install Axis Printer Ports from a Windows 2000workstation:1. To start the Add Printer Wizard, select Settings | Printers from the Startmenu and double-click the Add Printer icon. Start the installation byclicking Next.2. The Wizard asks you to select Local printer or Network printer. Select Localprinter. Click Next.3. Click Create a new port. In the Available Ports dialog, select AXIS Port andclick Next.4. Select NetBIOS/NetBEUI as your choice of network protocol and click OK.5. Select the AXIS Port you want to add from the list of available ports. Theport appears as . (Example: AX100086.LP1). The istaken from the table below. Click OK.6. Choose the appropriate printer driver for your printer. Click Next andproceed directly to step 9. It is only necessary to perform steps 7 - 8 if yourprinter does not appear in the list.Note:7. Click the Have Disk... button. Insert the printer driver diskette/CD that wasprovided with your printer, select the appropriate diskette/CD drive and clickOK.8. Select the printer driver you want to install and click Next.9. Enter an appropriate name for your printer and click Next.10. Choose whether you want to share the printer with other network users andclick Next.11. Choose whether you want to print a test page, click Next and then Finish.Ports available Parallel port 1 Parallel port 2 Serial portAXIS 5400+ LP1 — —AXIS 5600+ LP1 LP2 CM1Even if the desired printer is available in the Manufacturers and Printerslists, you are advised to use the printer driver provided with the printer. Thisassures you of the latest driver software.