Axis 5400+ User Manual

Also see for 5400+: Specification User guide Installation guide User guide User manual

Contents

Axis 5400+ User Manual Manual pdf 91 page image

Management and ConfigurationAXIS 5400+ / AXIS 5600+ User’s Manual 911. Click IP Settings in the main menu.2. Select print server in the list.3. Enter your data: IP address, Subnet mask, Default gateway and the printserver’s password (default password is pass).4. Click Set to save your settings.5. Click Rescan to update AXIS ThinWizard and see the changes.If Your Print Server isnot Shown in the ListIf your print server is not shown in the list, click “Click here...”. Byentering the serial number of the print server (found on the undersidelabel) you will be able to set the print server’s IP parameters.Example: 00408c181cf0UpgradingAxis ServersRefer to “Upgrading using AXIS ThinWizard” on page 81 for moreinformation about upgrading Axis servers using AXIS ThinWizard.MultipleConfiguration andInstallationUsing AXIS ThinWizard it possible to change the settings of several Axisservers simultaneously. It is also possible to copy the configuration fromone server to another. This is a convenient way to install a new server,based on the settings of an already existing server.For additional information, please refer to the AXIS ThinWizard onlinehelp.Using FTP for Print Server ManagementHaving assigned an IP address to your Axis Network Print Server, asdescribed in “Assign an IP Address to the Print Server” on page 14, youcan change the Axis Network Print Server parameter settings using theFile Transport Protocol (FTP).Ensure that FTP Enabled is set to yes. To check this parameter, browse tothe print server and select Admin | Network Settings | Detailed View |TCP/IP Network.Editing the config file Follow the instructions below to edit the config file using FTP:1. Log in to the Axis Network Print Server by typing:ftp or ftp in a DOS window (Windows)or in a UNIX shell.2. Enter the user id and the password. (The default entries are root and pass.)3. Download the config file to your host by typing:get config4. Edit the file using your preferred text editor.5. Save the config file to the Axis Network Print Server by typing:put config CONFIG