AXIS 5470e User’s Guide20Verifying the Communication Link1. Type WRKCFGSTS *DEV xxxx*, where xxxx are the first four characters of theprinter device name, on the AS/400 command line. A list of printers will be displayed.Make sure that the printer session is Active.2. Direct a printout to this printer device to check the integrity of the communication link.3. Press the AXIS 5470e test button once to print a test page. Make sure that the TN5250Estatus is defined on the test page as Idle, Actv or LU-1.Note:Proceed to Management and configuration on page 47 for information on supportedmanagement and configuration tools.If the setup fails, please refer to the troubleshooting section in the AXIS 5470e User’s Manual,supplied on the Axis Web site at http://www.axis.com
