AXIS 5470e User’s Guide38Setup using Queue-based printing over IP/IPX in PSERVER ModeAll previous firmware versions of Axis print servers allow users to print in an IPXenvironment using traditional queue-based printing in PSERVER mode. This method issupported in both Bindery and NDS mode.Installing the AXIS 5470e in IP/IPXFollow the instructions below:1. From the AXIS 5470e internal web pages, go to admin | Network Settings | NetWare.2. Set the NDS mode parameters on the NetWare page:• PSERVER NDS Tree (example: NW5TREE)orPSERVER NDS File Server: (example: FILESERVERNAME)• PSERVER NDS Distinguished Name:(example: AXISXXXXXX., where is the container where you want tocreate your print server)3. Click OK when finished.4. Use the NetWare Administrator to create the printer, print server and queue objects in the NDStree and then link them together. The Print Services Quick Setup (Non-NDPS) utility can beused for this. Go to Tools in the NetWare Administrator.5. Use the Add Printer Wizard on your work station to install the printer on your client.Notes:Important!• If both the IPX and IP protocols are enabled in your network and the print server uses DUAL_STACK (enabled bydefault) as its network transport protocol, then IPX will be chosen. To force the print server to use the IPtransport protocol, go to your print server’s web interface and choose Admin | Detailed View | NetWare andchange the NetWare Transport Protocol from DUAL_STACK to IP_ONLY. Save and exit when finished.• Pure IP requires that you run NetWare 5 or higher.In order for the print server to log in using the IP protocol, RCONAG6.NLM has to be loaded to a specified tree. Ifyou have multiple trees, make sure that one file server in the specified tree has RCONAG6.NLM loaded.
