Axis 5470e User Manual

Also see for Print Server 5470e: Specification Brochure User manual User manual

Contents

Axis 5470e User Manual Manual pdf 36 page image

AXIS 5470e User’s Guide36Setup for NetWareSetup using NDPSThe AXIS 5470e supports Novell Distributed Print Services (NDPS). You can run NDPSover Pure IP (TCP/IP) or IPX/SPX.Before the AXIS 5470e can be installed, make sure that NDPS is installed and a Broker isloaded on your NetWare file server.Notes:Having assigned an IP address to the AXIS 5470e as described in Assigning an IP addresson page 10, you are now ready to install the AXIS 5470e for NDPS printing. You can selectto install the connected printers as public or controlled access printers. Follow theinstructions below to install the AXIS 5470e using NDPS:Notes:• NDPS requires that you run NetWare 4.11 or higher.• Pure IP is only supported by NetWare 5 or higher.• The HP-JETADMIN parameter of the AXIS 5470e must be set to YES in order for the communication betweenthe AXIS 5470e and the NDPS gateway to be enabled. Set this parameter in the print server’s internal webpages: admin | General Settings | HP JetAdmin Support (default value=NO)• If you do not have an NDPS Manager object available, start out with creating one in the NetWare Administrator.