AXIS 5470e User’s Manual Section 6: Setting Up - NetWare 101Important!Setup for Queue-based printing over IPX/SPX (Remote Printer Mode)If you don’t have a PSERVER created on the file server, start out withcreating one in the NetWare Administrator, as described here:1. Start the NetWare Administrator.2. Choose Tools | Print Services Quick Setup (Non-NDPS).3. In the Print Services Quick Setup (Non-NDPS) dialogue, choosea name for the print server, printer and queue object. Choose’parallel’ as the printer type and Postscript as the Banner type.Click Create.4. Log into the AXIS 5470e web interface and choose admin |Network Settings | Detailed View | NetWare and write the nameof the print server you just created together with its slot numberin the NPRINTER/RPRINTER1-field (the slot number is the numberdedicated to the printer you have just created).5. Click OK when done.6. Use RCONSOLE or go to the file server console where you havecreated the object, load PSERVER.NLM and choose the print serveryou have just created.7. From the available options, choose ’Printer Status’, choose yournewly created printer object and check that the status of theattached queue is ‘Waiting for job’.In order for the print server to log in using the IP protocol,RCONAG6.NLM has to be loaded to a specified tree. If you havemultiple trees, make sure that one file server in the specified treehas RCONAG6.NLM loaded.
