AXIS 5470e User’s Manual Section 11: Management and Configuration 145Using FTPHaving assigned an IP address to your AXIS 5470e, as described inAssigning an IP address, on page 20, you can change the AXIS 5470eparameter settings using the File Transport Protocol (FTP).Editing the config file Follow the instructions below to edit the config file using FTP:1. Log in to the AXIS 5470e by typing:ftp or ftp in a DOS window(Windows and OS/2) or in a UNIX shell.2. Enter the user id and the password. (The default entries are rootand pass.)3. Download the config file to your host by typing:get config4. Edit the file using your preferred text editor.5. Save the config file to the AXIS 5470e by typing:put config CONFIGNotes:The example on the next page describes how to edit the config fileusing FTP from a DOS window.• It is important that the destination file is specified in capitalletters. Otherwise the edits are temporary and will be lostonce the AXIS 5470e has been powered off.• To edit the config file from a Macintosh you will need FTPsupport such as MacTCP, Fetch or Anarchie. The procedure forediting the file is the same as described above.