Section 6: Setting Up - NetWare AXIS 5470e User’s Manual96Section 6 Setting Up - NetWareThis section describes how to continue the installation of the AXIS5470e in the NetWare environment. Identify which transportprotocol you are running on your network and which installationmethod you should use. Continue the installation by selecting theappropriate installing instructions from the table below:If you intend to operate your AXIS 5470e in a multi-protocol, mixedenvironment, you should also proceed to the other relevant sectionsin this manual, namely:Section 7 Setting Up - Windows, on page 104Section 9 Setting Up - Macintosh, on page 122Section 10 Setting Up - UNIX, on page 128Section 12 IPP (Internet Printing Protocol), on page 158InstallationmethodTransportprotocol ActionNDPS TCP/IPIPX/SPXSee Setup using NDPS, on page 97Proceed with Installing the AXIS 5470e in an NDPS environments,on page 97.PrinterConfiguration methodTransportprotocol ActionPSERVERmodeIP/IPX See Setup using Queue-based printing over IP/IPX in PSERVERMode, on page 99 and thenQueue-based Printing Methods, on page 102RemotePrinter modeIPX/SPX See Setup for Queue-based printing over IPX/SPX (Remote PrinterMode), on page 101 and thenQueue-based Printing Methods, on page 102
