Axis 70 User Manual

Also see for 70: User guide

Contents

Axis 70 User Manual Manual pdf 152 page image

The Parameter List User’s Manual152The Parameter ListThis table below displays the AXIS 7000 parameter list. The middlecolumn shows applicable default values, and the right-hand column abrief description of the parameter. Some parameters may not beapplicable in the AXIS 70/70U.Important! The parameters are case dependent and must be entered exactly as in the table below.Parameter name Value DescriptionServer]HardwareAddress = 00:40:8c:18:02:3c Specifies the AXIS 7000 hardware address which is equal tothe serial number.Date =yyyy-mm-dd Specifies the date in yyyy-mm-dd formatTime = hh:mm:ss Automatically specifies the time zone in which the AXIS7000 operates using the Network Time Protocol (NTP). Timecan also be set manually in hh:mm:ss format using the 24hour clock.Note: The AXIS 7000 contains a real time clock which meansthat the time will be kept even if the power is turned off.FactoryDefaults = no Set this parameter toyes to reset to factory default settings.Note that all current settings will be lost.Restart = no Set this parameter toyes to restart the AXIS 7000.TimeZone = UTC Specifies the time zone in which AXIS 7000 operates.TimeSyncSource = NTP Specifies the time source for the AXIS 7000. Valid values areNTP, Windows (SMB) orNone.Note:To use Microsoft Windows NT Network (SMB) properly WINSmust be enabled and the Domain/GroupName parametermust be set to a valid name.ServerPassword = pass Specifies the Server password. The Supervisor/Administratorwill be prompted for this password when trying to access theAXIS 7000 for administration tasks. The password is used inbasically all protocols, i.e. HTTP, SNMP and FTP. Once writtento the configuration file, the password will be replaced by*'s, representing each letter of the password.DefaultProfile =Text Specifies the default profile.DefaultPaperSize = letter Specifies the default paper size.TemporaryDestinations = yes Specifies if users are allowed to add temporary e-maildestinations.TemporaryProfiles = yes Specifies if users are allowed to add temporary profiles.WebScanning = yes Specifies if users are allowed to use the Scan Documentfacility. Scan Document means that the user places adocument in the scanner device, and then displays or savesthe image via the AXIS 7000 Web browser interface.