Axis 70 User Manual

Also see for 70: User guide

Contents

Axis 70 User Manual Manual pdf 84 page image

Configuring the Document Server User’s Manual844. Edit the file using your preferred text editor. In Windows 95 andWindows NT environments, you can for example use Notepad.Note:5. Type put config.ini to download the file to the Document Server and saveit permanently.6. To exit FTP, type the command quit, bye, or exit.Notes:Scan Counter (AXIS 7000 only)The Counter functionality enables the authorized administrator orservice user to monitor the use of the scanner device. To access theService pages, follow these instructions:1. Type ‘service’ after the internet address of the AXIS 7000 in thelocation/address field of your web browser and click Enter.For example: http://123.123.123.123/service2. You will be prompted to enter User Name and Password. At theprompt, log on as service and use the default password service.Do not use MS Word or other similar word processor.• The configuration file can be used as a template when configuring multiple documentservers.• It is sufficient to download the configuration parameters that have changed. Theother parameter settings will remain unchanged.• All parameter settings apart from the IP address, Gateway and Subnet mask can bechanged using FTP. Please refer to “The Parameter List” on page 152.• If you upload the config.ini file the passwords will be represented by ‘*****’. These *****must be changed to the actual password before downloading the config.ini file to anDocument Server. The passwords can also be changed via the web interface afterdownloading the config.ini file.