Axis M1004–W User Manual

Also see for AXIS M-1004W: User manual Datasheet Installation guide Installation guide

AXIS M1004–W Network CameraAccess the ProductClick Pulse to activate the product’s output port for a defined period of time. For information about howto enable and configure output buttons, see page 26.Click the Active/Inactive buttons to manually activate and inactive the product’s output port. Forinformation about how to enable and configure output buttons, see page 26.The Manual Trigger button is used to trigger an action rule from the Live View page. For informationabout how to configure and enable the button, see Manual Trigger on page 13.Click Snapshot to save a snapshot of the video image. This button is primarily intended for use whenthe AXIS Media Control viewer toolbar is not available. Enable this button from Live View Config >Action Buttons.Manual TriggerThe Manual Trigger is used to trigger an action rule from the Live View page. The manual trigger can for example be used tovalidate actions during product installation and configuration.To configure the manual trigger:1. Go to Setup > Events.2. Click Add to add a new action rule.3. From the Trigger drop-down list, select Input Signal.4. From the second drop-down list, select Manual Trigger.5. Select the desired action and configure the other settings as required.For more information about action rules, see Events on page 34.To show the manual trigger buttons in the Live View page:1. Go to Setup > Live View Config.2. Under Action Buttons, select Show manual trigger button.AXIS Media Control viewer toolbarThe AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media Control (AMC) on page 15 for moreinformation. The toolbar displays the following buttons:The Play button connects to the Axis product and starts playing a media stream.The Stop button stops the media stream.The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specifiedin the AMC Control Panel.13