Axis M1004–W User Manual
Also see for AXIS M-1004W: User manualDatasheetInstallation guideInstallation guide
                                                                 | |
Contents
|
AXIS M1004–W Network CameraTechnical SpecificationsFunction/group Item SpecificationsWeight Camera: 111.4 g (0.24 lb.)IncludedaccessoriesPower supply, stand and clamp, Installation Guide, Windows decoder 1-user licenseVideomanagementsoftwareAXIS Camera Companion, AXIS Camera Station and video management software fromAxis’ Application Development Partners available on www.axis.com/techsup/softwareOptionalaccessoriesPoE Active SplitterInstallation DisplayNetwork I/OWarranty Axis 1–year warranty and AXIS Extended Warranty option see www.axis.com/warrantyConnectorsI/O Connector4-pin terminal block4 3 2 1For an example diagram, see Connection Diagrams on page 64.Function Pin Notes Specifications0 V DC (-) 1 0 V DCDC output 2 Can be used to power auxiliary equipment.Note: This pin can only be used as power out.3.3 V DCMax load = 50 mADigital input 3 Connect to pin 1 to activate, or leave floating (unconnected)to deactivate0 to max 40 V DCDigital output 4 Connected to pin 1 when activated, floating (unconnected)when deactivated. If used with an inductive load, e.g. a relay,a diode must be connected in parallel with the load, forprotection against voltage transients.0 to max 40 V DC, open drain,100 mA63 |
Related manuals for Axis AXIS M-1004W
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine