AXIS M1004–W Network CameraSet Up the ProductH.264H.264, also known as MPEG-4 Part 10/AVC, is a video compression standard that provides high quality video streams at low bit rates.An H.264 video stream consists of different types of frames such as I-frames and P-frames. An I-frame is a complete image whereasP-frames only contain the differences from previous frames.The H.264 stream settings can be configured from the Video > Video Stream page. Select the H.264 tab. The settings defined in thispage will apply to all H.264 streams that do not use a stream profile.The GOV length is the number of frames between two consecutive I-frames. Increasing the GOV length may save considerably onbandwidth requirements in some cases, but may also have an adverse affect on image quality.The Axis product supports the following H.264 profile(s):• Main. The Main profile provides higher compression with maintained video quality compared to the Baseline profile butrequires more processing power to decode.The bit rate can be set as Variable bit rate (VBR) or Constant bit rate (CBR). VBR adjusts the bit rate according to the imagecomplexity, using up more bandwidth for increased activity in the image, and less for lower image activity. When the activity inthe scene increases, the bit rate would usually increase as well. If there is a surplus in bandwidth, this may not be an issue andselecting Variable bit rate (VBR) will be sufficient. But if bandwidth is limited, it is recommended to control the bit rate by selectingConstant bit rate (CBR). When the activity in the scene increases, VBR adjusts the bit rate according to the complexity, using upmore bandwidth for increased activity in the scene, and less for lower scene activity. CBR allows you to set a target bit rate thatlimits the bandwidth consumption.The CBR target bit rate works like the ceiling of a tent. It limits the bit rate, while maintaining some flexibility. The bit rate may bounceup and down within the set target but when it nears the set target value, the limitation kicks in. However, because CBR will alwaysprioritize a continuous video stream, it allows temporary overshoots from the target bit rate. Because setting a target value preventsthe bit rate from increasing, frame rate and image quality are affected negatively. To partly compensate for this, select which variableshall be prioritized, frame rate or image quality. Not setting a priority means that frame rate and image quality are equally affected.The current bit rate can be set to appear as text overlay. Under Overlay Settings, select Include text and enter the modifier#b in the field.To apply the settings, click Save.MJPEGSometimes the image size is large due to low light or complex scenery. Adjusting the maximum frame size helps to control thebandwidth and storage used by the Motion JPEG video stream in these situations. Setting the frame size to the Default settingprovides consistently good image quality at the expense of increased bandwidth and storage usage in low light. Limiting the framesize optimizes bandwidth and storage usage, but may give poor image quality. To prevent increased bandwidth and storage usage,the maximum frame size should be set to an optimal value.Stream ProfilesA stream profile is a set of predefined stream settings including resolution, compression, frame rate and overlay settings. Streamprofiles can be used:• When setting up recording using action rules. See Events on page 34.• When setting up continuous recording. See Continuous Recording on page 39.• In the Live View page – select the stream profile from the Stream profile drop-down list.For quick setup, use one of the predefined stream profiles. Each predefined profile has a descriptive name, indicating its purpose. Ifrequired, the predefined stream profiles can be modified and new customized stream profiles can be created.To create a new profile or modify an existing profile, go to Setup > Video > Stream Profiles.To select a default stream profile for the Live View page, go to Setup > Live View Config.20