Axis M1103 User Manual

Also see for M11 Network Camera Series: User manual User manual User manual Installation guide User manual

5AXIS M11 Series - Product DescriptionHardware overviewNetwork connector - RJ-45 Ethernet connector. Supports Power over Ethernet. Using shielded cables is recommended.LED indicatorsLED Color IndicationNetwork Green Steady for connection to a 100 Mbit/s network. Flashes for network activity.Amber Steady for connection to 10 Mbit/s network. Flashes for network activity.Unlit No network connection.Status Green Steady green for normal operation.Note: The Status LED can be configured to be unlit during normal operation, or toflash only when the camera is accessed. To configure, go to Setup > SystemOptions > LED settings. See the online help files for more information.Amber Steady during startup, during reset to factory default or when restoring settings.Red Slow flash for failed upgrade.Power Green Normal operation.Amber Flashes green/amber during firmware upgrade.Network connector (PoE)Focus pullerStatus LEDZoom puller(AXIS M1113/M1114)Power LEDNetwork LEDPart number (P/N) & Serial number (S/N).The serial number may be required duringinstallation.Rear viewControl buttonCamera standIris connector (AXIS M1113/M1114)