Axis M3004-V User Manual

Also see for M3004-V: Technical specifications User manual Installation guide Installation guide

AXIS M3004-V Network CameraEventsNetwork Share Send ImagesTCP Send NotificationNoteA network share can also be used as a storage device for recorded video. Go to System Options > Storage to configure anetwork share before setting up a continuous recording or an action rule to record video. See Storage, on page 41 for moreinformation about storage devices.To add a recipient:1. Go to Events > Recipients and click Add.2. Enter a descriptive name.3. Select a recipient Type.4. Enter the information needed for the recipient type.5. Click Test to test the connection to the recipient.6. Click OK.SchedulesSchedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outsideoffice hours. Use one of the predefined schedules or create a new schedule as described below.To create a new schedule:1. Go to Events > Schedules and click Add.2. Enter a descriptive name and the information needed for a daily, weekly, monthly or yearly schedule.3. Click OK.To use the schedule in an Action Rule, select the schedule from the Schedule drop-down list in the Action Rule Setup page.RecurrencesRecurrences are used to trigger Action Rules repeatedly, for example every 5 minutes or every hour.To set up a recurrence:1. Go to Events > Recurrences and click Add.2. Enter a descriptive name and recurrence pattern.3. Click OK.To use the recurrence in an Action Rule, first select Time from the Trigger drop-down list in the Action Rule Setup page andthen select the recurrence from the second drop-down list.To modify or remove recurrences, select the recurrence in the Recurrences List and click Modify or Remove.32