AXIS M3004-V Network CameraSystem OptionsLinux/Unix syntaxarp -s address> number> tempping -s 408 address>Linux/Unix examplearp -s 192.168.0.125 00:40:8c:18:10:00 tempping -s 408 408 192.168.0.125Windows syntax (this may require that you run the command prompt as an administrator)arp -s address> number>ping -l 408 -t address>Windows example (this may require that you run the command prompt as an administrator)arp -s 192.168.0.125 00-40-8c-18-10-00ping -l 408 -t 192.168.0.1254. Check that the network cable is connected to the Axis product and then restart the product by disconnecting andreconnecting power.5. Close the command prompt when the product responds with Reply from 192.168.0.125:... or similar.6. Open a browser and type http:// address> in the Location/Address field.For other methods of assigning the IP address, see the Installation and Management Software CD or the document Assign an IPAddress and Access the Video Stream on Axis Support web at www.axis.com/techsupNote• To open a command prompt in Windows, open the Start menu and type cmd in the Run/Search field.• To use the ARP command in Windows 7/Windows Vista, right-click the command prompt icon and select Run asadministrator.• To open a command prompt in Mac OS X, open the Terminal utility from Application > Utilities.AXIS Video Hosting System (AVHS)AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible fromany location. For more information and help to find a local AVHS Service Provider go to www.axis.com/hostingAVHS is enabled by default. The settings are configured under System Options > Network > TCP IP > Basic.One-click enabled - Press the product’s control button (see Hardware Overview, on page 5 ) to connect to an AVHS service over theInternet. Once registered, Always will be enabled and the Axis product stays connected to the AVHS service. If the product is notregistered within 24 hours from when the button is pressed, the product will disconnect from the AVHS service.Always - The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product willstay connected to the service. This option can be used when the product is already installed and it is not convenient to use theone-click installation.AXIS Internet Dynamic DNS ServiceAXIS Internet Dynamic DNS Service assigns a host name for easy access to the product. For more information, see www.axiscam.netTo register the Axis product with AXIS Internet Dynamic DNS Service, go to System Options > Network > TCP/IP > Basic. UnderServices, click the AXIS Internet Dynamic DNS Service Settings button (requires access to the Internet). The domain name currentlyregistered at AXIS Internet Dynamic DNS service for the product can at any time be removed.37
