Axis M3004-V User Manual

Also see for M3004-V: Technical specifications User manual Installation guide Installation guide

AXIS M3004-V Network CameraHardware OverviewHardware Overview432151. Dome cover2. Control button3. microSD Card slot4. Network connector (PoE)5. Focus ringConnectorsFor technical specifications, see page 49.Network connector - RJ45 Ethernet connector. Supports Power over Ethernet (PoE).NOTICENOTICENOTICEThe product shall be connected using a shielded network cable (STP). All cables connecting the product to the network switchshall be shielded (STP) and intended for their specific use. Make sure that the network switch is properly grounded. Forinformation about regulatory requirements, see Regulatory Information, on page 2 .SD card slot - A standard or high-capacity microSD card (not included) can be used for local recording with removable storage.NOTICENOTICENOTICETo prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > SystemOptions > Storage > SD Card and click Unmount.Control button - The control button is used for:• Resetting the product to factory default settings. See page 44.• Connecting to an AXIS Video Hosting System service. See page 37. To connect, press and hold the button forabout 1 second until the Status LED flashes green.• Connecting to AXIS Internet Dynamic DNS Service. See page 37. To connect, press and hold the button forabout 3 seconds.LED IndicatorsColor IndicationUnlit Connection and normal operationAmber Steady during startup. Flashes during firmware upgrade.5