Axis M7010 User Manual

Also see for M7010: Installation guide User manual

AXIS M7010PTZ (Pan Tilt Zoom)Control QueueThe administrator can set up a queue for PTZ controllers from PTZ > Control Queue. Once set up, the PTZ Control Queue buttonsappear in the Live View page offering one viewer exclusive control for a limited period of time. Other users will be placed in queue.A user who belongs to a group (seeUsers, on page 30) with a higher PTZ priority can go before other users in the queue andtake control of the product. The order of priority is as follows:1. Administrator — An administrator takes over PTZ control regardless of who is first in queue. The administrator will beremoved from the queue 60 seconds after the last PTZ control command.2. Event — The Axis product can be configured to go to a preset position when triggered by an alarm (seeEvents, on page 25).The event will immediately be placed first in the queue except when an administrator is in control.3. Operator — Same as administrator but with lower priority4. Guard Tour — A guard tour (see ) has PTZ control for an indefinite period of time. It may be overridden by an operator,event or administrator. The guard tour will resume when higher priority groups leave the queue.5. Viewer — Multiple viewers must wait for their turn. The viewer has 60 seconds PTZ control before control is passedon to the next viewer in queue.Note• The administrator can enable and disable PTZ controls for selected users.• To identify different users in the viewer group, cookies must be enabled on the client.21