Axis M7010 User Manual

Also see for M7010: Installation guide User manual

AXIS M7010EventsEventsThe Axis product can be configured to perform actions when different events occur, for example, start a recording when motion isdetected. The set of conditions that defines how and when the action is triggered is called an Action Rule.Available Action Rule triggers and conditions include:• Applications — use installed applications to trigger the rule, see .• Detectors- Motion Detection — trigger the rule when motion is detected, seeMotion Detection, on page 22.- Tampering — trigger the rule when tampering is detected, seeCamera Tampering, on page 22.• Hardware- Video Signal — trigger the rule if video signal is lost.- Network — trigger the rule if network connection is lost or restored. This can for example be used to startrecording to the SD card.• Input Signal- Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, seeControls on theLive View Page, on page 8 . This can for example be used to validate actions during product installationand configuration.• PTZ- Moving — trigger the rule when the camera view moves due to a PTZ operation. This can for example be usedas an additional condition to prevent an action rule triggered by motion detection to record video while thecamera view moves due to a PTZ operation.- Preset Reached — trigger the rule when the camera stops at a preset position. This can be for example be usedwith the Send Images action to upload images from the preset position.• Storage- Available — trigger the rule when the storage device is unmounted or removed. This can for example beused to send maintenance notifications.- Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will beoverwritten to prevent the storage device from becoming full.- Locked — trigger the rule if the storage device is locked (write protected).• System- System Initializing — trigger the rule when the product is being started. This can for example be used to send anotification when the product restarts.• Time- Recurrence — trigger the rule periodically, seeRecurrences, on page 27. This can for example be used toupload an image every 5 minutes.- Use Schedule — trigger the rule according to the selected schedule, seeSchedules, on page 27.Available actions include:• PTZ Control- Preset Position — go to a preset position.25