Section 2: Getting startedAxis NPS 550 User’s Manual 13Network Installation1. Record the serial number of your NPS 550. You will need thisnumber for the setup.2. Connect your NPS 550 to the network using a twisted-pair(10baseT) or a thin-wire (10base2) Ethernet cable.Note: Each NPS print server is preconfigured with a unique Node Address(identical to the serial number). You can change this to a LocallyAdministrated Address, see page 68.The installation is now completed. Proceed with the setup sections forNetWare, Windows, OS/2, Unix and/or Macintosh.Before you begin: • Make sure that your network is ready to accept a new node.• Any network configuration should always involve the networkmanager.
