Section 7: Setup for MacintoshAxis NPS 550 User’s Manual 53Section 7Setup for MacintoshThe basic setup for Macintosh is done by opening the Chooser windowand clicking a printer.Before configuring your Macintosh system, you may want to configurethe NPS 550 (e.g. logical printer definitions). See Appendix A for details.If you intend to operate your NPS 550 in a multi-protocol environment,you should also proceed according to the other “Setup for...” sections asappropriate.Before you begin: • Make sure that the NPS 550 is powered on and attached to thenetwork.• Any network configuration should always involve the networkmanager.
