Axis OfficeBasic USB User Manual
Also see for OfficeBasic Parallel: Installation guide
                                                                       | |
Contents
| 
Basic InstallationAXIS OfficeBasic USB & AXIS OfficeBasic Parallel User’s Manual 13Section 3 Basic InstallationConnecting the HardwareAXIS OfficeBasic USBAXIS OfficeBasicParallel1. Make sure that your printer is switched off and that the Power Adapter isdisconnected from the print server.2. Locate the serial number, found on the underside label of the print server,and write it down. You will need this number to configure the print server.Example: S/N: 00408c181cf0AXIS OfficeBasic USB Connect the printer to the USB port using the USB cable.AXIS OfficeBasicParallelConnect the printer directly to the LPT port or using a printer cable.3. Connect the print server to the network using a twisted pair (category 5 orbetter) RJ45 cable, 10baseT or 100baseTX.4. Switch on the printer and make sure it is ready for use.5. Connect the Power Adapter to the print server. The Power indicator will lightup. When the Network indicator starts to flash, the print server is correctlyconnected to the network.Power AdapterconnectorEthernetconnectorNetworkindicatorPowerindicatorUSB printer port (USB1)Test buttonParallelPower AdapterconnectorEthernetconnectorNetworkindicatorPowerindicatorTest buttonConnectorLPT1 |
Related manuals for Axis OfficeBasic Parallel
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine