Axis OfficeBasic USB Wireless User Manual
Also see for OfficeBasic USB Wireless: SpecificationUser manualInstallation guideUser manualUser manual
                                                     | |
Contents
| 
Print Server Management40 AXIS OfficeBasic USB WirelessPerform a Factory Default:1. Verify that the DIP switch is on “Nor.”2. Disconnect the external power supply.3. Hold down the reset button.4. Reconnect the external power supply. Wait until the orange and green LEDindicators have blinked twice simultaneously.5. Release the reset button.6. The print server will restart (orange Status LED will blink 5 times).Important!• Performing a Factory Default will erase all settings of the print server todefault and should be performed with caution!• After performing a Factory Default, the default wireless settings will be:• Infrastructure mode• SSID = |
Related manuals for Axis OfficeBasic USB Wireless
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine