Axis P3214-V User Manual

Also see for AXIS P1425-LE Mk II: User manual Installation guide Installation guide Installation guide User manual

AXIS P3214-V Network CameraAccess the ProductSet the Root PasswordTo access the Axis product, you must set the password for the default administrator user root. This is done in the Configure RootPassword dialog, which opens when the product is accessed for the first time.To prevent network eavesdropping, the root password can be set via an encrypted HTTPS connection, which requires an HTTPScertificate. HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt traffic between web browsers and servers. TheHTTPS certificate ensures encrypted exchange of information. See HTTPS on page 46.The default administrator user name root is permanent and cannot be deleted. If the password for root is lost, the product must bereset to the factory default settings. See Reset to Factory Default Settings on page 57.To set the password via a standard HTTP connection, enter it directly in the dialog.To set the password via an encrypted HTTPS connection, follow these steps:1. Click Use HTTPS.A temporary certificate (valid for one year) is created, enabling encryption of all traffic to and from the product, and thepassword can now be set securely.2. Enter a password and then re-enter it to confirm the spelling.3. Click OK. The password has now been configured.Camera OrientationThis setting is defined the first time the product is accessed. Depending on how the Axis product is installed, select ceiling or wall .To change these settings, the product must be restored to the original factory default settings. To reset or restore the product, go toSetup > System Options > Maintenance in the product’s web pages. For information about reset and restore, see Maintenance onpage 55.Set Power Line FrequencyPower line frequency is set the first time the Axis product is accessed and can only be changed from Plain Config (see page 57)or by resetting the product to factory default.Select the power line frequency (50 Hz or 60 Hz) used at the location of the Axis product. Selecting the wrong frequency may causeimage flicker if the product is used in fluorescent light environments.When using 50 Hz, the maximum frame rate is limited to 25 fps.NotePower line frequency varies depending on geographic region. The Americas usually use 60 Hz, whereas most other parts ofthe world use 50 Hz. Local variations could apply. Always check with the local authorities.10