Axis P3214-V User Manual

Also see for AXIS P1425-LE Mk II: User manual Installation guide Installation guide Installation guide User manual

AXIS P3214-V Network CameraSet Up the ProductSet Up the ProductThe Axis product can be configured by users with administrator or operator rights. To open the product’s Setup pages, click Setup inthe top right-hand corner of the Live View page.• Administrators have unrestricted access to all settings.• Operators have restricted access to settings, see Users on page 45See also the online help .Basic SetupBasic Setup provides shortcuts to the settings that should be made before using the Axis product:1. Users. See page 45.2. TCP/IP. See page 48.3. Date & Time. See page 47.4. Video Stream. See page 17.5. Focus & Zoom. See page 16.The Basic Setup menu can be disabled from System Options > Security > Users.Focus & ZoomFor installation instructions, refer to the product’s Installation Guide.To set focus and zoom:1. Install the camera as described in the Installation Guide.2. Go to Video > Focus & Zoom.3. On the Basic tab, set the zoom level using the slider. The buttons < and > move the zoom position one step in eitherdirection. The buttons << and >> move the zoom position in multiple steps in either direction.4. Click Perform auto focus to focus the camera automatically.5. If more adjustments are needed, go to the Advanced tab.Note• Movements in front of the camera should be avoided during automatic focusing.On the Advanced tab, focus can be adjusted manually:1. Click Open iris to open the iris to its maximum position. This gives the smallest depth of field and provides the bestconditions for focusing.2. Focus is set in the Focus window. Use the mouse to move and resize the focus window.3. Click in the Focus position bar to focus on a desired location. The buttons < and > move the focus position one step ineither direction. The buttons << and >> move the focus position in multiple steps in either direction.4. When satisfied, click Enable iris to enable the iris.16