Axis P3214-V User Manual
Also see for AXIS P1425-LE Mk II: User manualInstallation guideInstallation guideInstallation guideUser manual
                                                                | |
Contents
|
AXIS P3214-V Network CameraAccess the ProductThe Play button connects to the Axis product and starts playing a media stream.The Stop button stops the media stream.The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specifiedin the AMC Control Panel.Click the View Full Screen button and the video image will fill the entire screen. Press ESC (Escape) on the computerkeyboard to cancel full screen view.The Record button is used to record the current video stream on your computer. The location where the recording is savedcan be specified in the AMC Control Panel. Enable this button from Live View Config > Viewer Settings.PTZ ControlsNoteThese controls are available if digital PTZ is enabled in the selected view area, see View Area on page 21.With the PTZ Control Queue enabled the time each user is in control of the PTZ settings is limited. Click the buttons to request orrelease control of the PTZ controls. The PTZ Control Queue is set up under PTZ > Control Queue.Click the Emulate joystick mode button and click in the image to move the camera view in the direction of themouse pointer.Click the Center mode button and click in the image to center the camera view on that position.The center mode button could also be used to zoom in on a specific area. Click in the image and drag to draw arectangle surrounding the area to be magnified. To zoom out, rotate the mouse wheel.Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ controls.User-defined buttons can also appear in the Control panel. See Controls on page 28.To view a specific view area or preset position, select it from the Source list.Pan and Tilt bars – Use the arrows to pan and tilt the camera view, or click on a position on the bar to steer the camera view tothat position.Zoom bar – Use the arrows to zoom in and out, or click on a position on the bar to zoom to that position.Clicking Zoom out to overview image will set the camera to the minimum zoom position. In this position, the cameracannot pan or tilt.The PTZ controls can be disabled under PTZ > Advanced > Controls, see Controls on page 28.12 |
Related manuals for Axis AXIS P1425-LE Mk II
manualsdatabase
Your AI-powered manual search engine