Axis P3224-LVE User Manual

Also see for AXIS P3224-LVE Mk II: Installation guide User manual

AXIS P3224-LVE Network CameraVideo• Medium Zipstream strength. Medium bandwidth reduction. Limited visual quality degradation in not prioritized areas insome scenes• Highest Zipstream strength. High bandwidth reduction. Visible quality degradation in not prioritized areas in many scenesLowest Zipstream strength is the default setting for the product. This configuration is very safe to use in all applications while stillreducing the bit rate.For cloud-connected cameras or cameras using edge storage that need to limit the bit rate for increased storage time it isrecommended to select the Highest Zipstream strength. This setting is very good to combine with motion detection triggering andvariable bit rate (VBR) where the bit rate is allowed to adapt to changes in complexity in the scene.Axis’ Zipstream Technology for H.264 conforms to the H.264 standard and is compatible with third-party clients and VMS solutionsthat decode H.264 video.The bit rate controller built into the product can be combined with Zipsteam to enforce a maximum bit rate (MBR) limit. AxisCommunications recommends using VBR or MBR with a rather high bit rate limit to enable the full potential of Axis’ ZipstreamTechnology.MJPEGSometimes the image size is large due to low light or complex scenery. Adjusting the maximum frame size helps to control thebandwidth and storage used by the Motion JPEG video stream in these situations. Setting the frame size to the Default settingprovides consistently good image quality at the expense of increased bandwidth and storage usage in low light. Limiting the framesize optimizes bandwidth and storage usage, but may give poor image quality. To prevent increased bandwidth and storage usage,the maximum frame size should be set to an optimal value.Stream ProfilesA stream profile is a set of predefined stream settings including resolution, compression, frame rate and overlay settings. Streamprofiles can be used:• When setting up recording using action rules. See Events on page 37.• When setting up continuous recording. See Continuous Recording on page 43.• In the Live View page – select the stream profile from the Stream profile drop-down list.For quick setup, use one of the predefined stream profiles. Each predefined profile has a descriptive name, indicating its purpose. Ifrequired, the predefined stream profiles can be modified and new customized stream profiles can be created.To create a new profile or modify an existing profile, go to Setup > Video > Stream Profiles.To select a default stream profile for the Live View page, go to Setup > Live View Config.Camera SettingsThe Video > Camera Settings page provides access to advanced image settings for the Axis product.Capture ModeCapture mode defines the maximum resolution and maximum frame rate available in the Axis product. A capture mode with a largemaximum resolution has a reduced maximum frame rate and vice versa. The capture mode setting also affects the camera’s angleof view as the effective size of the image sensor differs between capture modes. Capture mode is set the first time the productis accessed. Select the desired capture mode and click OK.ImportantChanging capture mode when the product has been configured is not recommended as most other settings will be eitherremoved or reset.20