Axis P3224-LVE User Manual

Also see for AXIS P3224-LVE Mk II: Installation guide User manual

AXIS P3224-LVE Network CameraConfigure the Live View PageConfigure the Live View PageYou can customize the Live View page and alter it to suit your requirements. It is possible to define the following features ofthe Live View page.• Stream Profile. See page 20.• Default Viewer for Browser. See page 27.• Viewer Settings. See page 27.• Action Buttons. These are the buttons described in Controls on the Live View Page on page 11.• User Defined Links. See page 28.Default Viewer for BrowsersFrom Live View Config > Default Viewer select the default method for viewing video images in your browser. The product attemptsto show the video images in the selected video format and viewer. If this is not possible, the product overrides the settings andselects the best available combination.Browser Viewer DescriptionAMC Recommended viewer in Internet Explorer (H.264/Motion JPEG).QuickTime H.264.Java applet A slower imaging alternative to AMC (Motion JPEG). Requires one of thefollowing installed on the client:• JVM (J2SE) 1.4.2 or higher.• JRE (J2SE) 5.0 or higher.Windows Internet ExplorerStill image Displays still images only. Click the Refresh button in your browser to view anew image.Server Push Recommended viewer for other browsers (Motion JPEG).QuickTime H.264.Java applet A slower imaging alternative to Server Push (Motion JPEG only).Other browsersStill image Displays still images only. Click the Refresh button in your browser to view anew image.For more information, please see the online help .Viewer SettingsTo configure options for the viewer, go to Live View Config > Viewer Settings.• Select Show viewer toolbar to display the AXIS Media Control (AMC) or the QuickTime viewer toolbar under the videoimage in your browser.• H.264 decoder installation. The administrator can disable installation of the H.264 decoder included with AXIS MediaControl. This is used to prevent installation of unlicensed copies. Further decoder licenses can be purchased from yourAxis reseller.• Select Show crosshair in PTZ joystick mode to enable a cross that will indicate the center of the image in PTZ joystickmode.• Select Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from thePTZ control panel.27