Axis P3224-LVE User Manual

Also see for AXIS P3224-LVE Mk II: Installation guide User manual

AXIS P3224-LVE Network CameraHardware OverviewHardware Overview123451 Network connector (PoE)2 SD memory card slot3 Part number (P/N) & Serial number4 Control button5 Status LED indicatorConnectors and ButtonsFor technical specifications, see page 60.Network ConnectorRJ45 Ethernet connector with Power over Ethernet (PoE).NONONOTICETICETICEDue to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded networkcable (STP) may be appropriate or required. All cables connecting the product to the network and that are routed outdoorsor in demanding electrical environments shall be intended for their specific use. Make sure that the network devicesare installed in accordance with the manufacturer’s instructions. For information about regulatory requirements, seeElectromagnetic Compatibility (EMC) on page 2 .SD Card SlotNONONOTICETICETICE• Risk of damage to SD card. Do not use sharp tools or excessive force when inserting or removing the SD card.• Risk of data loss. To prevent data corruption, the SD card should be unmounted before removal. To unmount, go to Setup >System Options > Storage > SD Card and click Unmount.This product supports microSD/microSDHC/microSDXC cards (not included).For SD card recommendations, see www.axis.comControl ButtonFor location of the control button, see Hardware Overview on page 7 .The control button is used for:7