Axis P3915–R User Manual

Also see for P3915-R: Installation guide Installation guide User manual Installation guide

AXIS P3915–R Network CameraAccessing the ProductTo set the password via a standard HTTP connection, enter it directly in the dialog.To set the password via an encrypted HTTPS connection, follow these steps:1. Click Use HTTPS.A temporary certificate (valid for one year) is created, enabling encryption of all traffic to and from the product, and thepassword can now be set securely.2. Enter a password and then re-enter it to confirm the spelling.3. Click OK. The password has now been configured.Set Power Line FrequencyPower line frequency is set the first time the Axis product is accessed and can only be changed from Plain Config (see page 51)or by resetting the product to factory default.Select the power line frequency (50 Hz or 60 Hz) used at the location of the Axis product. Selecting the wrong frequency may causeimage flicker if the product is used in fluorescent light environments.When using 50 Hz, the maximum frame rate is limited to 25 fps.NotePower line frequency varies depending on geographic region. The Americas usually use 60 Hz, whereas most other parts ofthe world use 50 Hz. Local variations could apply. Always check with the local authorities.The Live View PageThe controls and layout of the Live View page may have been customized to meet specific installation requirements and userpreferences. Consequently, some of the examples and functions featured here may differ from those displayed in your own Live Viewpage. The following provides an overview of each available control.Controls on the Live View PageClick View size to scale the image down to 800 pixels wide or to full scale. Only availablein MJPEG.Select a stream profile for the Live View page from the Stream Profile drop-down list. Forinformation about how to configure stream profiles, see page 18.Click Pulse to activate the product’s output port for a defined period of time. Forinformation about how to enable and configure output buttons, see page 26.Click the Active/Inactive buttons to manually activate and inactive the product’s outputport. For information about how to enable and configure output buttons, see page 26.10