Axis P3915–R User Manual

Also see for P3915-R: Installation guide Installation guide User manual Installation guide

AXIS P3915–R Network CameraLive View Config• Select Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from thePTZ control panel.• Select Enable recording button to enable recording from the Live View page. This button is available when using theAMC viewer. The recordings are saved to the location specified in the AMC Control Panel. See AXIS Media Control(AMC) on page 13.User Defined LinksTo display user-defined links in the Live View page, select the Show custom link option, give the link a name and then enter the URLto link to. When defining a web link do not remove the 'http://' from the URL address. Custom links can be used to run scripts oractivate external devices connected to the product, or they can link to a web page. Custom links defined as cgi links will run thescript in the background, in a hidden frame. Defining the link as a web link will open the link in a new window.Output ButtonsExternal I/O devices connected to the Axis product’s output ports can be controlled directly from the Live View page.To display output buttons in the Live View page:1. Go to Setup > Live View Config.2. Under Output Buttons, select the type of control to use:- Pulse activates the output for a defined period of time. The pulse time can be set from 1/100 second to 60seconds.- Active/Inactive displays two buttons, one or each action.To configure the active and inactive states, go to System Options > Ports & Devices > I/O Ports and set the port’s Normal state.For more information about I/O ports, see I/O Ports on page 49.26