Axis P3915–R User Manual
Also see for P3915-R: Installation guideInstallation guideUser manualInstallation guide
                                                             | |
Contents
|
AXIS P3915–R Network CameraAccessing the ProductNoteThese controls are available if digital PTZ is enabled in the selected view area, see View Area on page 20.With the PTZ Control Queue enabled the time each user is in control of the PTZ settings is limited. Click the buttons to request orrelease control of the PTZ controls. The PTZ Control Queue is set up under PTZ > Control Queue.Click the Emulate joystick mode button and click in the image to move the camera view in the direction of themouse pointer.Click the Center mode button and click in the image to center the camera view on that position. The center modebutton could also be used to zoom in on a specific area. Click in the image and drag to draw a rectangle surroundingthe area to be magnified. To zoom out, rotate the mouse wheel.Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ controls.User-defined buttons can also appear in the Control panel. See Controls on page 28.To view a specific view area or preset position, select it from the Source list.Pan and Tilt bars – Use the arrows to pan and tilt the camera view, or click on aposition on the bar to steer the camera view to that position.The PTZ controls can be disabled under PTZ > Advanced > Controls, see Controls on page 28.12 |
Related manuals for Axis P3915-R
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine