Axis P5522 User Manual

Also see for P5522: Installation guide Datasheet User manual Preventive Maintenance Instructions and Checklist Installation guide

AXIS P5522 PTZ Dome Network CameraEventsHTTP Server • Receives notification messages• Receives uploaded images• Descriptive name• URL (IP address or host name)• User name and password• Proxy settingsTCP Server • Receives notification messages • Descriptive name• Network address (IP address or host name)• Port numberFor details on each settings, see the online help .Event TypesAn Event Type describes how and when the Axis product performs certain actions.ExampleIf somebody passes in front of the camera and an event has been configured to detect and respond to motion, the Axis product canrecord and save images to an FTP server and send a notification email. Images can be sent as email attachments.Set up a triggered eventThe following example describes how to configure the Axis product to upload images when motion is detected.1. Go to Events > Motion Detection and set up a motion detection window. See Set up motion detection, on page 31.2. Go to Events > Event Types and click Add triggered.3. Enter a descriptive name for the event, for example Motion detected.4. Set the Priority — high, normal or low.5. Set the Respond to Trigger parameters to define when the event is active, for example, after office hours.6. Select Motion detection from the Triggered By list. Select the desired motion detection window and indicate if the eventshould be triggered when motion starts or stops (or both).7. Set the When Triggered parameters, that is, define what the product should do when motion is detected. To upload images,select Save stream and enter the required information. See Save stream.8. Click OK to save the event.29