AXIS P5522 PTZ Dome Network CameraEventsAudio detectionThe Axis product can be configured to generate an alarm when audio rises above, falls below or passes the audio alarm level. Thealarm level can be set in the range 0–100 where 0 is the most sensitive and 100 the least sensitive.1. Go to Events > Audio Detection.2. Set the audio alarm level and click Save.3. Go to Events > Event Types and set up a triggered event, see Set up a triggered event, on page 29.NoteA multi-connector cable (available from Axis) is required when connecting external audio equipment to the Axis product.See Multi-Connector Cable (sold separately), on page 47.Port StatusThe list on the Events > Port Status page shows the status of the product’s input and output ports. Inputs and outputs are configuredfrom the System Options > Ports & Devices page which requires administrator rights.NoteA multi-connector cable (available from Axis) is required when connecting I/O devices to the Axis product. SeeMulti-Connector Cable (sold separately), on page 47.33