Axis Q6035 Installation Manual

Also see for Q6032: Installation guide User manual Installation guide Install guide

Page 12 AXIS Q6032/Q6034/Q6035 Installation GuideBracket mount (optional accessory)1. Install the selected bracket according to theinstructions supplied with the bracket. If drilling isrequired, make sure to use drill bits, screws andplugs that are appropriate for the material.2. Loosen the 3 camera base lid screws and removethe camera base lid, see illustration on page 7.3. Route the network cable and the multi-connectorcable, if applicable, through the holes in themounting bracket.4. Hook the camera to the safety wire on the bracket.5. Connect the network cable and, if applicable, themulti-connector cable to the network camera.6. Install AXIS T8123, seeInstall AXIS T8123 High PoE Midspan 1-port, on page 13.7. Put the camera base lid back in its original position.8. Slide the unit holders on the network camera into the slots on the bracket and rotate thecamera unit.9. Secure the network camera to the mounting bracket by fastening the 3 screws (Torx T30).Wall bracket (mounting example)SafetywireSlots forScrewsTorx T30unit holders