Axis Q6035 Installation Manual

Also see for Q6032: Installation guide User manual Installation guide Install guide

AXIS Q6032/Q6034/Q6035 Installation Guide Page 9ENGLISHHard ceiling mount1. Prepare the ceiling for installation of the mounting plate, use the supplied drill template toposition the holes. Make sure to use drill bits, screws and plugs that are appropriate for thematerial.2. Install the mounting plate. The arrow on the mounting plate will align with the logotype on thecamera.3. Loosen the 3 camera base lid screws and remove the camera base lid, see illustration on page 7.4. Secure the camera using the supplied safety wire.5. Route and connect the network cable and the multi-connector cable, if applicable, to thenetwork camera. Be careful not to damage the cables when connecting them. Make sure thefoam gasket holes are aligned with the cable tracks and, if applicable, remove the cut-out piecefor the multi-connector cable from the foam gasket.6. Put the camera base lid back in its original position and fasten the screws.7. Slide the unit holders on the network camera into the slots on the mounting plate and rotatethe camera unit.8. Install the High PoE Midspan 1-Port, seeInstall AXIS T8123 High PoE Midspan 1-port, on page13.9. Check that the indicator LEDs on the midspan indicate the correct conditions, see the table onpage 24 for further details.Mounting plateSafety wire