Axis Q7436 User Manual

Also see for Q7436: Installation guide Installation guide User manual

Axis Q7436 User Manual Manual pdf 27 page image

AXIS Q7436 Video Encoder BladePTZ (Pan Tilt Zoom)5. Specify the View Time in seconds or minutes.6. Specify the View Order or select the Random view order option.7. Click Save.To modify or remove guard tours, go to PTZ > Guard Tour, select the guard tour in the Guard Tour List and click Modify/Remove.For more information see the online help .AdvancedControlsPanel Shortcut Command Buttons can be configured to provide direct access to commands issued via the VAPIX® ApplicationProgramming Interface. The buttons will be displayed in the PTZ control panel, which is available in the Live View page throughthe Ctrl panel button, see page 12.Installing a PTZ driverThis Axis product supports several PTZ devices. Please see www.axis.com for a complete list of supported devices, and to obtain thecorrect driver. To install a PTZ device you need to install the PTZ driver.To install the PTZ driver go to PTZ> Driver Selection. Browse to find the driver (e.g. driver.ptz) and Upload. If the driver wassuccessfully uploaded, it appears in the Select driver to use drop-down list. From this drop-down list, select the driver to installor remove, and click Save.Select Activate PTZ to enable PTZ. The address of the connected device appears against Device ID. Choose the Device type from thedrop-down list. To find which device type to use, consult the documentation supplied by the PTZ driver.To complete the installation go to System Options > Ports & Devices > COM Port (see COM Port) and verify the settings.Control QueueThe administrator can set up a queue for PTZ controllers from PTZ > Control Queue. Once set up, the PTZ Control Queue buttonsappear in the Live View page offering one viewer exclusive control for a limited period of time. Other users will be placed in queue.A user who belongs to a group (see Users, on page 39) with a higher PTZ priority can go before other users in the queue andtake control of the product. The order of priority is as follows:1. Administrator — An administrator takes over PTZ control regardless of who is first in queue. The administrator will beremoved from the queue 60 seconds after the last PTZ control command.2. Event — The Axis product can be configured to go to a preset position when triggered by an alarm (see Events, on page 33).The event will immediately be placed first in the queue except when an administrator is in control.3. Operator — Same as administrator but with lower priority4. Guard Tour — A guard tour (see page 26) has PTZ control for an indefinite period of time. It may be overridden by anoperator, event or administrator. The guard tour will resume when higher priority groups leave the queue.5. Viewer — Multiple viewers must wait for their turn. The viewer has 60 seconds PTZ control before control is passedon to the next viewer in queue.Note• The administrator can enable and disable PTZ controls for selected users.• To identify different users in the viewer group, cookies must be enabled on the client.27