Axis Q7436 User Manual

Also see for Q7436: Installation guide Installation guide User manual

Axis Q7436 User Manual Manual pdf 34 page image

AXIS Q7436 Video Encoder BladeEvents- System Ready — trigger the rule when the product has been started and all services are running. This can forexample be used to send a notification when the product restarts.• Time- Recurrence — trigger the rule periodically, see Recurrences, on page 36. This can for example be used to uploadan image every 5 minutes.- Use Schedule — trigger the rule according to the selected schedule, see Schedules, on page 36.Available actions include:• Output Port — activate an I/O port to control an external device.• Overlay Text — display an overlay text, see Using Overlay Text in an Action Rule, on page 21.- Preset Position — go to a preset position.- Guard Tour — start a guard tour, see Guard Tour, on page 26.• Record Video — record video to a selected storage.• Send Images — send images to a recipient.• Send Notifications — send a notification message to a recipient.• Send Video Clip — send a video clip to a recipient.• Status LED — flash the LED indicator. This can for example be used to validate triggers such as motion detection duringproduct installation and configuration.Setting Up an Action RuleAn action rule defines the conditions that must be met for the product to perform an action, for example record video or send anemail notification. If multiple conditions are defined, all of them must be met to trigger the action.The following example describes how to set up an action rule to record video to a network share if there is movement in thecamera’s field of view.Set up motion detection and add a network share:1. Go to Detectors > Motion Detection and configure a motion detection window, see page 292. Go to System Options > Storage and set up the network share, see page 46.Set up the action rule:1. Go to Events > Action Rules and click Add.2. Select Enable rule and enter a descriptive name for the rule.3. Select Detectors from the Trigger drop-down list.4. Select Motion Detection from the drop-down list. Select the motion detection window to use.5. Optionally, select a Schedule and Additional conditions, see below.6. Under Actions, select Record Video from the Type drop-down list.7. Select a Stream profile and configure the Duration settings as described below.8. Select Network Share from the Storage drop-down list.9. Optionally, select the Fallback action option to, for example, send an email notification if the recording does not start.See Fallback Action, on page 35.34